2024 RR430 4T EFI
FULLY ASSEMBLED + RIDE AWAY
Product Description
The Rignano sull’Arno-based manufacturer presents the new MY2024 RR range. Carrying over many of the great characteristics found in the previous model year release, there has also been a number of significant new features introduced across the range, as well as upgrades specific to certain engine sizes to maintain the supremacy of the Beta RR family. Beta worked in close collaboration with Enduro champions Brad Freeman and Steve Holcombe to develop a host of small improvements on both the powertrain and the frame/suspension for the MY24 RR 2-Stroke and 4-Stroke models, to consolidate the already highly acclaimed characteristics of the previous generation. As always, the guiding philosophy of the engineers at Beta has been to not only increase the performance of the brand's bikes, but to also make this performance even more accessible. So rather than major changes, this model year has gained a series of upgrades intended to consolidate all the outstanding qualities of each individual model. Completing the picture are new graphics, which lend a zero-compromises racing look to the entire range.
The MY24 RR 430 features a high-performance engine that is at its best when the rider exploits the long gearing and significant torque.
The updates introduced for the MY 2024 RR range are summed up below:
-
New seat: the foam making up the seat has a different geometry and density to provide greater rider comfort. The greater support area and different composition of the materials now provide the rider with a much more comfortable point of contact with the bike.
-
Suspension: in addition to the continuous refinement of the suspension setup, the MY24 bikes feature lighter upper fork tubes, particularly in the area of engagement of the lower fork sliders. The different machining of the tubes is designed to provide controlled flexibility, which results in smoother damping of rough terrain and therefore significantly improved comfort and sensitivity.
-
New radiators: new lighter and tougher radiators, featuring shaped reservoirs in the upper section in order to allow the bike to achieve a greater steering angle. The new radiators, which provide better coolant circulation for improved vehicle cooling, feature a greater number of reinforcements, and are also equipped with a new non-plastic cap which is tougher and less exposed to potential impacts.
-
Brakes: the front braking system has received upgrades to the brake line. The line's protective sheath is now fastened with dual crimping (at the top and bottom, previously it was only crimped at the bottom), allowing the brake line protection to better withstand the continuous stresses it is subjected to.
-
New graphics: the MY24 range does a U-turn on the simple, essential look which marked the previous bike. The completely new graphics have an aggressive, geometric, and modern look, achieved thanks to skilful use of the classic red, white, and black colours typical of this model, integrating perfectly with frame and plastics in the characteristic Beta red.
-
Traction control: the traction control system has been further refined by the Betamotor technicians. Through improved mapping, the system is now more precise in its operation, mitigating unwanted or overly invasive intervention.
-
Airbox: the airbox sleeve has had its geometry overhauled, and with it the airflow to the engine, to offer greater performance at medium to high engine speeds, while maintaining the torque at low speeds which was obtained with the introduction of the current exhaust manifold. This innovation now allows for 'full-blooded' power delivery along the entire curve.
ADR and LAMS compliant in all Australian states and territories.
Specifications
CHASSIS
Frame Molybdenum steel with double cradle split above the exhaust post
Wheel Base 1490 mm
Max Length 2180 mm
Max Width 815 mm
Max Height 1270 mm (handlebar)
Seat Height 940 mm
Ground Clearance 320 mm
Footrest Height 413 mm
Weight (WET) 108.5 kg (Front 53.2 kg / Rear 55.3 kg)
Fuel Tank 9.0L
Reserve 2.3 L
Cooling System 1.3 L
Front Suspension Hydraulic USD Frok with ø 48mm shaft
Rear Suspension Monoshock with progressive compound lever
Shock Absorber Stroke 135mm
Front Wheel Travel 295mm
Rear Wheel Travel 290mm
Front Brake Hydraulic / Wave disc ø260 mm and double-piston floating caliper
Rear Brake Hydraulic / Wave disc ø240 mm and single-piston floating caliper
Front Rim 21 x 1,6 - 36 fori
Front Tyre 90/90 - 21
Rear Rim 18 x 2.15 - 36 holes
Rear Tyre 140/80 -18
ENGINE
Type Single cylinder 2 stroke liquid cooled
Bore 95 mm
Stroke 60.8 mm
Displacement 430.9 cc
Compression Ratio 12.33:1
Valve Train DOHC finger follwer / 4 Titanium valve
Starter Electric Starter
ACG Kokusan
Spark Plug NGK LKAR 8A-9
Lubrication 2 oil pumps
Fuel System Synerject dual electronic injection
Throttle body Ø 42 mm - Synerject
Clutch Wet multi-disc clutch
Primary Drive Z.31/72
Transmission 6 gears
Drive Chain
Engine Oil SAE 10W/50 & SAE 10W/40